Everything below concerns sublimation. We keep the language plain, cite what the science says, and separate well-supported claims from open questions.
Last reviewed on 2026-07-10. Where a claim depends on a specific study, the study is described rather than over-claimed.
After primary drying, secondary drying removes water that remains bound to the material. This stage raises the shelf temperature while maintaining low pressure, which encourages desorption of unfrozen water. Residual moisture can be reduced to a low percentage, improving stability for many products. The process parameters, including freezing rate, shelf temperature, and chamber pressure, influence the final pore structure and reconstitution behavior. Control of these variables helps prevent collapse or meltback during drying.
A formulation often contains excipients that protect the active ingredient during freezing and drying. Bulking agents provide structure, while lyoprotectants stabilize sensitive molecules. The freezing step can produce ice crystals whose size and distribution affect the drying rate, and cycle design includes freezing, annealing, and drying phases. If the product temperature rises above a critical value, the cake may collapse or lose its porous structure. Successful lyophilization therefore depends on the interaction between formulation, equipment, and cycle design.
Lyophilization is a dehydration process that removes water from a frozen material by sublimation under low pressure. The material is first frozen so that water becomes ice; then the surrounding pressure is lowered below the vapor pressure of ice. Heat is applied gently so ice changes directly to vapor without passing through a bulk liquid phase. The vapor is collected on a cold condenser, leaving a dry porous matrix. This process differs from simple evaporation because the material remains frozen during the main drying stage.
The process usually has three stages: freezing, primary drying, and secondary drying. Freezing sets the ice crystal structure and can determine pore size in the final cake. Primary drying removes free ice by sublimation at low pressure and low shelf temperature. Secondary drying removes bound water by raising the shelf temperature, although some water may remain as part of the solid. Cycle parameters depend on formulation, fill volume, vial type, and equipment performance.
The physical chemistry of freezing influences whether a formulation forms an amorphous glass or a crystalline solid. Amorphous systems can collapse if product temperature rises above the glass transition temperature of the freeze concentrate. Crystalline systems may show eutectic melting, where ice and solute melt together at a fixed temperature. Formulators add bulking agents, lyoprotectants, and buffers to preserve structure and biological activity. The optimum cycle keeps product temperature below critical thresholds during primary drying while allowing efficient sublimation.
| Property | Value | Notes |
|---|---|---|
| Common synonyms | Freeze-drying, lyophilisation | Lyophilization is the American spelling; lyophilisation is British |
| Primary drying mechanism | Sublimation of ice | Occurs under vacuum below the triple point |
| Typical chamber pressure | 0.05-0.5 mbar | Range depends on product and equipment |
| Typical shelf temperature during freezing | -40 to -20 °C | Lower temperatures may be used for labile products |
| Resulting product form | Porous cake or powder | Appearance depends on formulation and cycle |
Lyophilization removes water from a frozen material by sublimation under reduced pressure. The process begins with freezing, which converts liquid water into ice and concentrates dissolved solids. Primary drying then lowers chamber pressure so ice changes directly into vapor without passing through a liquid phase. Secondary drying raises the shelf temperature to remove bound water that remains after ice sublimation. The result is a dry, porous structure that can be reconstituted later.
Formulation composition influences whether freeze-drying produces an intact cake or a collapsed mass. Excipients such as sugars and polymers can raise the collapse temperature and provide bulk during drying. The critical temperature for primary drying is often the collapse temperature or the glass transition temperature of the maximally concentrated phase. If the product temperature exceeds this threshold, the frozen matrix may soften and lose structure. Established practice therefore links shelf temperature and chamber pressure to the formulation's thermal properties.
The physics of freeze-drying couples heat transfer, mass transfer, and phase change. Heat supplied through the shelf must reach the sublimation front without melting the ice or degrading the product. Water vapor then travels through the already dried layer and leaves the chamber, where low pressure and cold traps keep it from returning. The dried layer acts as a resistance to vapor flow, so drying rate changes as the front recedes. Open questions remain about how pore structure and formulation heterogeneity affect drying uniformity at larger scales.
Freezing determines ice crystal structure and pore size, which affect drying speed and product uniformity. Rapid freezing creates small crystals, while slow freezing creates larger crystals and often faster sublimation. During primary drying, chamber pressure is held below the vapor pressure of ice, and shelf temperature supplies heat for sublimation. The ice front recedes, leaving a porous matrix. Thermal limits such as collapse and eutectic temperatures set safe boundaries for formulation. These limits vary with solute composition and concentration.
Secondary drying removes bound water that remains after ice sublimation. Shelf temperature is raised gradually while pressure remains low, reducing water content to a target range. Over-drying can cause brittleness or electrostatic issues, while under-drying affects stability. The endpoint is often judged by pressure rise tests, temperature measurements, or water content analysis. Scale-up depends on matching heat and mass transfer across equipment sizes. Small changes in shelf temperature or pressure can alter cycle length substantially.
== Mission == The PLA's primary mission is the defense of the CCP and its interests. It is the guarantor of the party's survival and rule, and the party prioritizes maintaining control and the loyalty of the PLA. In 2004, paramount leader Hu Jintao stated the mission of the PLA as:
In some other invertebrates such as earthworms, the circulatory system is not used to transport oxygen and so is much reduced, having no veins or arteries and consisting of two connected tubes. Oxygen travels by diffusion and there are five small muscular vessels that connect these vessels that contract at the front of the animals that can be thought of as "hearts". Squids and other cephalopods have two "gill hearts" also known as branchial hearts, and one "systemic heart". The branchial hearts have two atria and one ventricle each, and pump to the gills, whereas the systemic heart pumps to the body.
=== Mechanics of spitting === Spitting cobras of the genera Naja and Hemachatus, when irritated or threatened, may eject streams or a spray of venom a distance of 1.2 metres (4 ft) to 2.4 metres (8 ft). These snakes' fangs have been modified for the purposes of spitting; inside the fangs, the channel makes a 90° bend to the lower front of the fang. Spitters may spit repeatedly and still be able to deliver a fatal bite. Spitting is a defensive reaction only. The snakes tend to aim for the eyes of a perceived threat. A direct hit can cause temporary shock and blindness through severe inflammation of the cornea and conjunctiva. Although usually no serious symptoms result if the venom is washed away immediately with plenty of water, blindness can become permanent if left untreated. Brief contact with the skin is not immediately dangerous, but open wounds may be vectors for envenomation.
Sources: en.wikipedia.org
Mn(CO)5Cl + AlCl3 + CO → [Mn(CO)+6][AlCl−4] The use of strong acids succeeded in preparing gold carbonyl cations such as [Au(CO)2]+, which is used as a catalyst for the carbonylation of alkenes. The cationic platinum carbonyl complex [Pt(CO)4]2+ can be prepared by working in so-called superacids such as antimony pentafluoride. Although CO is considered generally as a ligand for low-valent metal ions, the tetravalent iron complex [Cp*2Fe]2+ (16-valence electron complex) quantitatively binds CO to give the diamagnetic Fe(IV)-carbonyl [Cp*2FeCO]2+ (18-valence electron complex).
== History == Modified atmosphere/modified humidity (MA/MH) packaging is a type of equilibrium modified atmosphere packaging (EMAP), which evolved due to the need for more control of humidity in the packaging. Most of the polymers that are commercially used in EMAP are polyolefin-based, characterized by low moisture vapor transmission rate (MVTR). Temperature fluctuations during the various links in the cold logistics chain are unavoidable and will result in condensation forming on the inner surface of the package. The accumulation of condensed water in packages with low MVTR is conducive for pathological and physiological disorders. Not only does excess moisture enhance fungal and bacterial decay and the formation of off odors, it also encourages leaf sprouting in topped root vegetables, regrowth of leaves and physiological disorders such as tissue discoloration and peel blemishes. Certain produce items are more sensitive to excess moisture than others.
=== February === February 5, 2010: Canada Employment increased by 43,000 in January, all in part-time, pushing the unemployment rate down 0.1 percentage points to 8.3%. January marks the fourth employment gain in six months. Despite the recent increases, employment still remains 280,000 below the level of October 2008. Employment gains in January were driven by women aged 25 to 54 and youths. This was the first notable increase for youths since the start of the employment downturn in the fall of 2008. There were large increases in part-time employment in January, bringing it back to the level of six months earlier. Full-time employment was little changed in January, but has trended up over the last six months. January's increase was among private sector employees, while self-employment declined. Over the last six months, the number of private and public sector employees has been rising while self-employment has been little changed. The largest employment increases in January occurred in business, building and other support services, and retail and wholesale trade. These were partially offset by losses in professional, scientific, and technical services, as well as agriculture.
Sources: en.wikipedia.org
Lyophilization removes water by sublimation from a frozen material, while evaporation changes liquid water into vapor. The low-pressure freezing step avoids the liquid phase and can preserve heat-sensitive structures.
Vacuum lowers the pressure below the triple point of water, allowing ice to sublimate directly into vapor. It also helps remove water vapor from the product chamber and shortens primary drying.
Many aqueous solutions and suspensions can be freeze-dried, but some formulations collapse or do not form a stable cake. The process requires careful formulation and cycle development.
The main change is sublimation, in which ice becomes water vapor without melting into liquid water. This occurs when the chamber pressure is held below the vapor pressure of ice while mild heat is supplied. The result is a dry, porous solid that retains much of its original shape.